EXUP Worldwide

Hell yeah !!! Had the carbs pulled apart, cleaned and fully calibrated. Found one drain and jet bad. Replaced the spark plugs and started right up. A final adjustment and they run like new ! :banana My wife and I had a blast riding them home....god I missed them. I was just missing small issues and ...

This did a big reduction...I also had to replaced the rubber collars between the Intake and Carbs. This helped reduce the occurance more. But I have the bikes in now to have the carbs re-cleaned, fully adjusted (fuel level, Idle screw, etc), and synced. I could not find any other issues. So hopefull...

OK. Pulled the carbs apart again. Found a little build up in the Idle Screw passages. And when pulling the choke plungers I found that number one had a split rubber seal. I ordered it Saturday and I should be able to replace it this weekend as long as it comes in by friday. I want to get this 4 - 5 ...

Well, finally got them out again and cleaned everything, so I thought. After starting them up, the 600 runs a little ruff, but Stays idle and only has a little bit of a chug feeling while riding steady. getting on the gas it pulls nicely. As fo the 750, it now runs but after taking the choke off fro...

OK. Pulled the carbs off and found a lot of build up on both sides. But I was unsure about pulling the needles. If I remove the float bowls and clean the jets will I need to recalibrate the float bowls and reset any mixture screws ? If I only remove the bowls and jets these should be able to stay th...

Thanks Gang....I will look into it this week if work allows.

ok....My wife and I have a 96 YZF600 and a 97 YZF750. The wife's 600 sat for a month between rides, she broke her foot. But ran 3 weeks ago after her foot healed. My 750 was ridden for short rides every two to three weeks since May last year. When we recently went to start the bikes, the batteries w...

Nice bike. I would love to get a Duc 848 to ride besides my YZF750.

When I changed mine on my YZF750 and my wife's YZF600 we used a 12 inch extention and a universal knuckle with the sparkplug deep socket. After the body was off, it was about 30 minutes each bike. The outside 2 were not to bad, but having small hands to help to get back to the center two worked grea...

Very Clean for a 1990. Well maintained.

Hey Gang! I am new to the site as a member. I have been reading many of your great threads. My wife made my Christmas and New Years! She is getting my 96 YZF600R which has a Full Race Vance and Hines Exhaust, Jet Ket Shift kit and Timing advancer. All done by the previous owner. It came from Canda s...