EXUP Worldwide

Hi Mike, where did you get the fairings from and who much if thats not a rude question as I am after a set myself, thanks Daryl.

Hi guys,
I have a head and base gasket off a YZF1000 so I will take them to my local Yamaha dealer and match them up and let you all know, thanks for the ansewers so for, Daryl.

Thanks FZRDude,
I was thinking that if someone laid the base gasket from both model together then tried the head gasket together, that will give an indication of the barrel studs and any oil galleries, also cylinder spacing.
Thanks Daryl.

Hi all,
I hope that someone will be able to help me, what I want to know is will a crank and rods from a YZF1000 go into the crankcases from a YZF750. I also plan to fit the YZF1000 barrels and the YZF750 head. I have the YZF1000 head as well.
Thanks in advance Daryl.

Hi all, been a while since my last post, but I look on the board every day for any new postings, anyway what I need to know is the carb spacing on all the YZF750/FZR1000/YZF1000 the same. I have a set of FCR39 which are going on my YZF1000 but they are off a FZR1000 and they don't line up the same. ...

Hi Guys, I own a bike shop down here and have fitted all the tires that have been mentioned including other brands and all my customers just rave about the Pilot Powers. I also get to ride their bikes and the Powers seem to grip the best and feel the most stable of the lot. It all has to do with pre...

Hi all, finaly found a place to play, I need some help with putting a 1000 motor in a 750 frame, please help. Also if any one has a kit manual for the 0w01 it would be greatfully needed. I have the motor, frame, 1000 electrics and carbs inc 1000 airbox. Plans are to fit 2004 R1 front end and rear wh...