EXUP Worldwide

mikuni BDS34 identification 3DX00<br>main 1.4=105<br>main 2.3=102.5<br>needle position 3(middle)<br>pilot=15<br>pilotairsrew=2 turns out<br>fuel level on tickover using clear tube = 7.3 to 9mmbelow line<br><br>thanks to Appleyard Keighley<br><br>Gray<br><br>will add more as I find it <p></p><i></i>

flyin circus cheers for help,carbs ok and all check out now gonna eliminate ignition, time permitting as usual !<br>Iwilltry and find your thread<br><br>Gray <p></p><i></i>

Hi all<br><br>finally got some work done on the FZ (notfzr),put it all back together so now can give more info<br><br>started ok tickover ok, when warm if i open choke a little it stops<br><br>riding to test rollon-it seems to stutter or misfire from 4k to 10k then possibly clears, also when i slow ...

sorry but its an FZ750genesis not frz<br>Gray <p></p><i></i>

fzr1000 87 presume uk model<br>mikuni bds37 fuel level at tickover 7.3 to 9.3<br>ive got haynes manual which coveres your bike if you need owt else email me Gghealey@aol.com <p></p><i></i>

yes scoexup i am in uk, york to be exact, where are you hanging and what you riding.<br>please excuse the slow replies as lots on and little time spare.<br><br>I got a haynes manual but engine frame nos dont tally with manual so dont know what settings, inlet/ exhaust<br>ta for fork help yes only co...

not really sure. number starts 2mg01 and another on plate states mtte fz750 gues that answers us<br>thanks mate<br> <p></p><i></i>

thanks for tips<br>i will look at the ideas given (when time) and give more feedback.will have to reassemble first as stripped brakes, forks etc<br>valves not checked yet and haynes manual confusing which model (2mg013345) Do valves(shims)wear tighter and keep valves open and what effect would it ha...

Can anyone help ?<br>I bought a 750 genesis and it runs poorly above tickover, If i crack open the throttle it does not respond very quickly(sounds like its choking itself or gettin too much air) same without air box.<br>Had the bowls off and i think this was the 1st stripdown so should be standard....

Lads<br>I just bought the above but cant find a manual, does anyone know the grade and quantity of oil for the forks (road use so not too hard) please.<br>I have both lower fairing panels in average condition also upper in poor cond.<br><br>gray <p></p><i></i>

sorry cant post photo,e mail Gghealey@aol.com and i will send two<br>gray <p></p><i></i>

dont know if this will work but tried to post photo fzr750genesis airbox<br><br>[img noborder]<!--EZCODE AUTOLINK START--><a href="http://C<!--EZCODE EMOTICON START :\ --><img src=http://www.ezboard.com/images/emoticons/ohwell.gif ALT=":\"><!--EZCODE EMOTICON END--> My">C<!--EZCODE EMOTICON START :\...