EXUP Worldwide

Very quick job in a decent Lathe, do you know any workshops, should be relatively cheap too, they will ask you to remove the tyre before machining.
Regards
Ozzyfzr

Glad you looked at the loadings! new one was way low on figures.

What is the thickness of the standard bearing? if it's wider than 7mm, you could incorporate a flange on your spacer and have it facing inward, that way the bearing will retain the collar! Hope it helps Regards Ozzyfzr PS Just check the loadings on the new bearing against the old bearing (manufactur...

I would be worried about the collar ring being displaced, would need some sort of locking flange incorporated into the collar to stop it coming adrift.
If you get my drift!
Regards
Ozzyfzr

The nearest would be a 6005RS (double rubber seal) 25id and 47od with 12 width , would require hub machining and different size dust seal.
Ain't gunna be easy tho
Hope it helps
Regards

Try http://www.thebearingshop.com/

I have an RU front wheel and just measured them 40od & 17id
Hope it helps
Regards
Ozzyfzr

Do not be in a rush to squash the snorkel mod! you went from 124.7 hp 131.1 hp a little over 5.3% increase, motogp teams pay in excess 1Million to get an extra hp. You also gained more torque, every racer wants hp and torque. The thing is you got extra hp that is what matters, unfortunately it cost ...

Holy crap! I was at Karting in Gympie yesterday with my son and it was +38C, I think I like our version of the Centigrade scale better

Certain brake fluids can attack the seals, this causes them to swell and it may block off the small bleed hole back into the reservoir. If this is blocked it holds residual pressure causing the brakes to lock on (no bleed down). This may be the case! When it was stored did it have bungs/red caps bla...

Brilliant!
Ozzyfzr

Quite thought provoking FZRDUDE! are you looking at the whole situation from the corporate greed side of things? cuz if you are, I'm with you!! What happened to businesses being happy with mediocre profits, providing income for families and the community in general, GREED is what has turned modern s...

How to stuff up a real bike!!!!
what a waste
my 2c worth
Regards
Ozzyfzr

Enjoy!
Regards
Ozzyfzr

Done this a while ago for a friend (model - 87 Genesis), just forgot to post pictures, had some paint left over so I painted my XJ as well (minus seat as I was re-trimming it) http://i147.photobucket.com/albums/r319/ozzyfzr/FZRRepaint.jpg http://i147.photobucket.com/albums/r319/ozzyfzr/100_9165s.jpg

I will be heading down for that beauty!!!
See you there!
Regards
Ozzyfzr

Hi Ya mate! any luck selling her yet?
Regards
Ozzyfzr

Good stuff Steve!!! just keep improving!
Regards
Ozzyfzr

PS "Reliability is everything" (good to put some demons to bed!)

All the best at OP and I would love to hear how the motor feels post mods etc, Good Luck mate!!
I'm off to Eastern Creek tomorrow with my mate and his RVF400, in a field of 26 400's should be good!
All the best Steve
Regards
Ozzyfzr

I do believe I may be trecking down for this one! will let you know when I consult my mate to see if he's entered
Regards
Ozzyfzr

Morayfield, Northern Brisbane, Queensland
Did Oran Park a while ago, not a bad trip with my mate in the 400 Class.
Regards
Ozzyfzr

When and where is your next meeting, a ride to Sydney is not out of the question! just might end up on my XJ900 and not the FZR tho!!
Regards
Ozzyfzr