Breather

davemfox2 · Post by **davemfox2** » Wed Dec 16, 2020 11:51 am

Any ideas on how I get this off please?

Dave

spook · Post by **spook** » Wed Dec 23, 2020 5:09 am

What is it Dave?

davemfox2 · Post by **davemfox2** » Wed Dec 23, 2020 9:44 am

It's a breather for an OW endurance tank

Dave

spook · Post by **spook** » Wed Dec 23, 2020 10:35 pm

It looks a bit like a honda type nc400 rc30 type breather.

due to the fact it is already succumb to vice grips. Wash the fuel out, heat it up with a propane torch. Tighten first then undo.

If that fails, slit the fitting with a dremel. That will relieve the tension and it will come off.

All the best mate. Cheers.

davemfox2 · Post by **davemfox2** » Thu Dec 24, 2020 6:16 am

Cheers; I gave it some more heat and it came off. Looks like a JIC fitting. Will clean it up and measure it up properly

Dave

davemfox2 · Post by **davemfox2** » Wed Apr 21, 2021 9:20 am

spook wrote: ↑
Wed Dec 23, 2020 10:35 pm
It looks a bit like a honda type nc400 rc30 type breather.

It's a Harris item, and they no longer stock them. Closest match is the Suzuki GSXR/RG one

Dave

EXUP Worldwide

Breather

Breather

Re: Breather

Re: Breather

Re: Breather

Re: Breather

Re: Breather