Page 1 of 1
Breather
Posted: Wed Dec 16, 2020 11:51 am
by davemfox2
Any ideas on how I get this off please?
Dave
Re: Breather
Posted: Wed Dec 23, 2020 5:09 am
by spook
What is it Dave?
Re: Breather
Posted: Wed Dec 23, 2020 9:44 am
by davemfox2
It's a breather for an OW endurance tank
Dave
Re: Breather
Posted: Wed Dec 23, 2020 10:35 pm
by spook
It looks a bit like a honda type nc400 rc30 type breather.
due to the fact it is already succumb to vice grips. Wash the fuel out, heat it up with a propane torch. Tighten first then undo.
If that fails, slit the fitting with a dremel. That will relieve the tension and it will come off.
All the best mate. Cheers.
Re: Breather
Posted: Thu Dec 24, 2020 6:16 am
by davemfox2
Cheers; I gave it some more heat and it came off. Looks like a JIC fitting. Will clean it up and measure it up properly
Dave
Re: Breather
Posted: Wed Apr 21, 2021 9:20 am
by davemfox2
spook wrote: ↑Wed Dec 23, 2020 10:35 pm
It looks a bit like a honda type nc400 rc30 type breather.
It's a Harris item, and they no longer stock them. Closest match is the Suzuki GSXR/RG one
Dave
