carbs

[gazq]

I have just syncronized the carbs on my 1993 YZF 750, and what a bloody nightmare, I had to remove the carbs and replace the blanking bolts on the intake manifold with the pipes supplied with the vacuum gauges. I have read that on later models the bike had rubber pipes already fitted to the manifold so you could connect straight onto the gauges, if this is correct can I fit the system to my bike without replacing the manifolds?<br> Thanks.<br> G.Q. <p></p><i></i>

[LC130LOAD1]

<!--EZCODE AUTOLINK START--><a href="http://www.motionpro.com/Docs/serviceto ... <!--EZCODE AUTOLINK END--><br><br>For the optional 6mm adapters, order # 08-0040, Sug. Retail: $13.90.<br><br>Order these, install them, cap them off with the supplied plugs.<br><br>Makes life easy. <p></p><i></i>

[ChuckD]

I have to admit, gauges are not the way to go, amercury stick is still the best tool for the job.<br>CHUCK D. <p></p><i></i>