YET ANOTHER CARBURATION QUIZZ

Want the specs for a valve adjustment? Can you provide tips for bleeding brakes? Please use this section.
Post Reply
exupjon
Veteran Poster
Posts: 229
Joined: Tue Jun 22, 2004 11:42 am

YET ANOTHER CARBURATION QUIZZ

Post by exupjon »

i thourt i got it sorted BUT ,just power washed it ,then ran it on the paddock stand to dry while i put away the stuff ,ok for a wile but then it got warmmer revs up revs down and iwasnt tochin it ,bummer ,then i snaped the throtle to 11000 and flames came out (looked great) so ime thinkin its rich its dynojetted with a kn i know thay run rich ,but not that rich so do i adjust the pilot screws in for low end and the needle hight for high or wot (or do i get a newer bike lol)<br><!--EZCODE EMOTICON START :lol --><img src=http://www.ezboard.com/images/emoticons/laugh.gif ALT=":lol"><!--EZCODE EMOTICON END--> <p></p><i></i>

FZR 1000 EXUP
Help!!! I need a LIFE!!!
Posts: 641
Joined: Mon Aug 23, 2004 4:02 pm

Re: YET ANOTHER CARBURATION QUIZZ

Post by FZR 1000 EXUP »

LOL...<br><br>Sounds to me Jon mate like you need to do what I did and spend £53 on a CarbTune II ... <!--EZCODE ITALIC START--><em>(dont forget extention kit for another £12)</em><!--EZCODE ITALIC END--><br><br>It made a BIG difference to mine, and I got so much experiance now from takin my carbs off the bike now, .. I replaced all the screws holding the carb tops and bottoms on with nice stainless steel ones, my suggestion mate is if its already got a jet kit and K&N, then the only thing you can do is make sure there properley balanced before you go exploring other options.<br><br>Good luck mate, and if you want to buy just the remote extention kit and ride your bike over here, I'll use my carb tune II and balance it for nowt <!--EZCODE EMOTICON START :D --><img src=http://www.ezboard.com/images/emoticons/happy.gif ALT=":D"><!--EZCODE EMOTICON END--> <br> <p><!--EZCODE BOLD START--><strong>Yamaha FZR 1000 EXUP RU, 1992, Red/White/Black,Veypor On-Bike Datalogger, CarbTune II Remote Extension Kit, Streamline Wing Mirrors with Integrated Indicators, Goodridge Hoses, 2001 R1 Calipers, Kevlar Clutch, K&N Air Filter, Art Pro Series II Silencer, Factory Pro Emultion Tubes, SuperFlux Red LED Engine / Fairing Install.</strong><!--EZCODE BOLD END--></p><i></i>

exupjon
Veteran Poster
Posts: 229
Joined: Tue Jun 22, 2004 11:42 am

Re: YET ANOTHER CARBURATION QUIZZ

Post by exupjon »

done that and the valves <p></p><i></i>

exupjon
Veteran Poster
Posts: 229
Joined: Tue Jun 22, 2004 11:42 am

Re: YET ANOTHER CARBURATION QUIZZ

Post by exupjon »

and at this rate u are gona need a full page for the bumph <p></p><i></i>

Andre
Regular Poster
Posts: 86
Joined: Sun Sep 05, 2004 11:45 am

Re: YET ANOTHER CARBURATION QUIZZ

Post by Andre »

Water in the electrics, soon will dry then no more flames 'cause you'll be back to a 4 stroke from current 8 stroke !<br><br>Stay on two wheels ! <p></p><i></i>

Post Reply