Coils. question

Want the specs for a valve adjustment? Can you provide tips for bleeding brakes? Please use this section.
Post Reply
Peppa2
Veteran Poster
Posts: 172
Joined: Sun Apr 10, 2005 4:13 pm
Location: Norway

Coils. question

Post by Peppa2 »

Hi, i bought a set of coils http://motorcycleproducts.co.uk/catalog ... 37686.html like these a while back, havent mounted em yet, so my big question is, the wires are they + and ground or does they both deliver spark/power + to the coils,if so then i have to go in the big book of truth to go find out how i should conect them :banana
1990 FZR 1000..Image
COFFE FOR ALL THE LAZY ONES.
zzzzZzZZzzZzzzZzz
Image

ozzyfzr
Veteran Poster
Posts: 296
Joined: Tue Mar 27, 2007 7:43 am
Location: Australia

Post by ozzyfzr »

Basically, check your old ones and see if any of the spade connections are connected to the mounting posts (ohms), if not like mine they are just a straight -ve and +ve connections (either way round). If they do meter to one side on the spade, connect the new ones the same way.
From memory the TCI switches the +12V feed.
Hopeit helps
Regards
Ozzyfzr
"Q: How do you make a small fortune in racing?
A: Start with a large one!"

Post Reply