RACE TECH GOLD VALVE CARTRIDGE EMULATORS

Want the specs for a valve adjustment? Can you provide tips for bleeding brakes? Please use this section.
Post Reply
fzsambuca
New Poster
Posts: 32
Joined: Sat Aug 12, 2006 9:48 pm

RACE TECH GOLD VALVE CARTRIDGE EMULATORS

Post by fzsambuca »

HI I just pulled the trigger on a set of these http://cgi.ebay.com/ebaymotors/RACE-TEC ... mainQ5f100
Are they that simple to install? I heard somewhere they need to be braze welded?
THANKS

User avatar
FZRDude
Co-Admin
Posts: 4807
Joined: Tue Jan 13, 2004 3:20 am
Location: North-Left Coast, USA
Contact:

Post by FZRDude »

http://www.motorcyclecruiser.com/tech/r ... index.html

From the article
Anyone with $125 and a little mechanical know-how can install a set of Cartridge Emulators, or you can always use one of Race Tech's authorized shops or any shop proficient enough to rebuild forks. The required tools -- a small flat head screw driver, an allen key, a long allen socket, pliers, a power drill, a hack saw, and a tape measure -- will be found in most people's tool boxes or can be bought relatively cheaply. You will also need some way to support your bike while the forks have been removed. A scissors jack with wood across the lower frame rails might suffice.

I didn't read the whole page, just quickly scaned across.
There are some who call me........Tim?
In Memory Of John "Silver" Douglas (Dec. 08, 2008) R.I.P. My Friend.

:wave: :popcorn :cursing :super-mad

fzsambuca
New Poster
Posts: 32
Joined: Sat Aug 12, 2006 9:48 pm

Post by fzsambuca »

THANKS

Post Reply