Page 1 of 1

Wiring Gurus please

Posted: Fri Dec 17, 2010 7:04 am
by Yoniboi
I'm trying to fit L/H switchgear from a Suzi, 'cos I want the bar mounted choke lever, among other considerations.

Problem is the Yami switch seems to be two switches in one, the dark green, brown and brown/white wires which are turn left and turn right, plus (and this is the issue) yellow/red and black, which seem to be a switched earth for the turn signal relay.

The Suzi just has the obvious three, not the switched earth. How can I get around this????

Cheers for any advice guys,
John

Posted: Fri Dec 17, 2010 12:04 pm
by Big Jon
Try a unit from an Ace?

Posted: Fri Dec 17, 2010 1:23 pm
by Yoniboi
Yeah cheers Jon,

The Ace has a bar mounted choke lever?
I didn't know.
ARSE!!!
Anyway, I've got the Suzi unit now and it's perdy so I wondered if i could by-pass the switched earth somehow.

If not, I'll look for an Ace unit.
Cheers
John

Posted: Fri Dec 17, 2010 11:57 pm
by Big Jon
I'm not a guy that can help with that electrickery stuff, that's why I mentioned the ace, figgered the wiring might be the same. It does have a bar mount choke lever. Anyone else on here would be better for the wiring stuff, good luck.

Posted: Mon Dec 20, 2010 2:01 pm
by ThomVis
I guess this is not the YZF750 LH handlebar switch?
I looked at the wiring diagram of that one and the green is headlights, and black is straight to earth.
If they differ that much it might be worth forgetting about the original wiring and build a parallel system to do the turn signals, preferably using an electronic flasher relay. Give me a diagram of your bike and I can look into it.

Posted: Tue Dec 21, 2010 12:47 pm
by Yoniboi
Thanks Thom,

No, it's a '90 FZR1000 (or it was when I started).

I hadn't considered wiring for flashers seperately, and it's not a half bad idea (I mean it's a good one)!!! :)

I haven't made much progress in the last year, due to laziness, injury, my girlfriend, illness and and kids, basically in that order... but I've got a week off work between Xmas and New Year, my girlfriend's working, my kids are with their mum and I was going to go snowboarding but now it doesn't seem like a hot idea so the project may well see some progress!

Thanks for all your input guys!

John

Posted: Tue Dec 21, 2010 1:26 pm
by Yoniboi
Hey Big Jon,

I'm confused. I looked on eBay at L/H switchgear for the YZF1000 and non of them have a choke lever.

Is that a US thing?

Posted: Tue Dec 21, 2010 6:52 pm
by Big Jon
Nope, should be an Ace thing, it can be removed so they may be selling the choke separate. Make sure you get a cable with it, it may prevent headaches in case you need a cable meade up and need the style of ends, I'll look and see if I have an extra, but I don't think I do.

Posted: Thu Dec 23, 2010 2:45 am
by Yoniboi
Cheers Jon!

John

Posted: Thu Dec 23, 2010 10:50 pm
by sickle44
If you can draw me a detailed diagram of everything, including the way it is now and the way you'd like it to be, I should be able to help you out John.

Posted: Fri May 13, 2011 12:57 pm
by rgvlc
Yoniboi. I have a thundercat one here that has a bar mounted lever. show me a picture of the FZR connector plug and see if it is the same

Posted: Fri May 13, 2011 5:34 pm
by sickle44
John,

I guess I should amend my last post not to saw, " draw it the way you want it to be," to, "Tell me how you want it to work and then I can draw things out for you the way it should be.

BTW, there used to be a universal switch you could get with choke and the Euro pass button, cost about $70