Page 1 of 1

'88 FZR 1000 rear shock noise

Posted: Fri Jun 06, 2003 8:03 am
by Akira
Hi to all. <br>I just got a FZR 1000 and want to fix some minor things before making some serious trips with it.<br>I hear some squealing noise coming from to rear shock area, do you guys know how can I fix that, is it a common problem?<br>Mostly audible at low speed and bumpy roads<!--EZCODE EMOTICON START >: --><img src=http://www.ezboard.com/images/emoticons/mad.gif ALT=">:"><!--EZCODE EMOTICON END--> <br>Thanks and safe riding. <p></p><i>Edited by: <A HREF=http://pub28.ezboard.com/bexupbrotherho ... d>Akira</A> at: 6/6/03 8:13 am<br></i>

Re: '88 FZR 1000 rear shock noise

Posted: Sun Jun 08, 2003 6:35 am
by flyingcircus68
The rear shock is connected to a rising rate linkage. This should be disassembled, cleaned, inspected, refurbished and greased around every 20k. If anyone has washed it at the car wash or if they blasted directly at the pivot points on the linkage with a garden hose, water has inevitably entered the bearing cavities. The water would then have no where to go so it would settle down, get comfortable, and elope with the exposed iron on the bearings, races or bushings. The result is a bumper crop of rust and pitting. If you haven't replaced your shock by now, chances are that it has been awaiting retirement for a while. The obvious way to tell is it will have a loose feeling in the turns and the tire will lose traction over bumps under throttle.<br><br>Paul <p></p><i></i>

Re: '88 FZR 1000 rear shock noise

Posted: Fri Jun 13, 2003 5:38 am
by flyingcircus68
Oh yeah, I forgot to mention that the heim joint that connects the bottom of the shock to the rising rate linkage dries out well before the other pivot points.<br><br>Paul <p></p><i></i>

Re: '88 FZR 1000 rear shock noise

Posted: Thu Jun 19, 2003 9:46 am
by Akira
Thanks man, I fixed it. Works ok now.<br><br> <p></p><i></i>

Re: '88 FZR 1000 rear shock noise

Posted: Thu Jun 19, 2003 5:59 pm
by jjs777
How did you fix it? I hve the same problem. Did you follow the advise given on the previous posts? Can I assume you took it somewhere or did you do it yourself?<br><br>Thanks <p></p><i></i>

Re: '88 FZR 1000 rear shock noise

Posted: Sat Jun 21, 2003 12:19 am
by Akira
"The rear shock is connected to a rising rate linkage. This should be disassembled, cleaned, inspected, refurbished and greased around every 20k"<br><br>This is the solution to your problem. I did it myself, not too difficult. <p></p><i></i>

ha!

Posted: Fri Sep 30, 2005 8:53 pm
by jjs777
funny how this topic comes up every now and then

my 95 is doing it now too....so off comes the linkys...on go the new linkies from dragracer

Posted: Sun Oct 02, 2005 3:01 am
by barneyfzr600
I'll be doin mine soon, tooooooo many miles on mine!