![Dancing Banana :banana](./images/smilies/exup/banana_dancing.gif)
Coils. question
Coils. question
Hi, i bought a set of coils http://motorcycleproducts.co.uk/catalog ... 37686.html like these a while back, havent mounted em yet, so my big question is, the wires are they + and ground or does they both deliver spark/power + to the coils,if so then i have to go in the big book of truth to go find out how i should conect them ![Dancing Banana :banana](./images/smilies/exup/banana_dancing.gif)
![Dancing Banana :banana](./images/smilies/exup/banana_dancing.gif)
1990 FZR 1000..![Image](http://i4.photobucket.com/albums/y102/Peppa2/norway.gif)
COFFE FOR ALL THE LAZY ONES.
zzzzZzZZzzZzzzZzz
![Image](http://i4.photobucket.com/albums/y102/Peppa2/a017.gif)
![Image](http://i4.photobucket.com/albums/y102/Peppa2/norway.gif)
COFFE FOR ALL THE LAZY ONES.
zzzzZzZZzzZzzzZzz
![Image](http://i4.photobucket.com/albums/y102/Peppa2/a017.gif)
Basically, check your old ones and see if any of the spade connections are connected to the mounting posts (ohms), if not like mine they are just a straight -ve and +ve connections (either way round). If they do meter to one side on the spade, connect the new ones the same way.
From memory the TCI switches the +12V feed.
Hopeit helps
Regards
Ozzyfzr
From memory the TCI switches the +12V feed.
Hopeit helps
Regards
Ozzyfzr
"Q: How do you make a small fortune in racing?
A: Start with a large one!"
A: Start with a large one!"