New Member

The say a picture is worth a thousand words. Take a look at what the other EXUP Worldwide members ride, or post your own pride & joy. Please use your submission point, or post your own link.
cormier33
Regular Poster
Posts: 54
Joined: Sun Jun 12, 2011 12:20 am
Location: Vancouver, Canada

New Member

Post by cormier33 »

Hey guys,

I have already made a couple of posts and received some good advice, one piece of it advising that it is appreciated when an introduction and a couple of pics of the bike are put up. So,

I have been riding for about 10 years now, first bike was a GS500, and then I got a '97 YZF 750RJ. I still have my YZF and ride it quite a bit. It has about 90,000K on its clock and still rides great. This year, I am going to drop a bit of money on it to put new brake lines, bearings, etc seeing as how everything is original. Any suggestions on modifications, upgrades would be much appreciated so that I know where I should be spending my money.

Here are some pictures of my baby:

Image

Image
[/img]
1997 YZF750RJ

spook
Dolphin-headed purple plasma TLR thing?
Posts: 3837
Joined: Mon Jan 29, 2007 7:12 pm
Location: Melbourne. Australia

Post by spook »

Sweet! Welcome to the forum! Looks like a very nice part of town you live in! Suburban paradise :)

90K! How are the inlet valve clearances?

cormier33
Regular Poster
Posts: 54
Joined: Sun Jun 12, 2011 12:20 am
Location: Vancouver, Canada

Post by cormier33 »

Funny you ask that Spook,

When she is cold and I start her up, she spits out little bits of black soot. It immediately stops when she is warm but this is leading me to think that the valves need some work (or perhaps the carbs are running too rich?) I am trying to decide if that is the case and if I should get it looked at soon or perhaps take on the task during the winter.

The bike rides perfectly though, just the black soot discharge when it is cold.
1997 YZF750RJ

YEC_YZF750SP
Help!!! I need a LIFE!!!
Posts: 520
Joined: Thu Mar 02, 2006 10:28 am
Location: British Columbia, Canada

Post by YEC_YZF750SP »

Great to see you here! :) Your YZF750 looks really clean, especially with 90K on it!

Yep, looking forward to seeing some trick mods on your sweet YZF.

For brakes, I'd highly recommend:

Goodridge or Galfer Stainless Steel Brakelines
Brembo 19X20 (forged or billet) radial pump front brake master cylinder
Brembo rotors
EBC HH compound brake pads
Motul RBF600 or RBF660 fluid

Cheers,

Julian

sickle44
Help!!! I need a LIFE!!!
Posts: 3519
Joined: Thu Jan 26, 2006 6:35 pm
Location: Edmonton, Alberta

Post by sickle44 »

Wow!!

Very nice looking ride for 90K dude. Indeed, it looks as clean as the well manacured lawns in your burb.

Thanks for sharing, much appreciated.

These five valve heads are notorious for tightening up so that there's almost zero clearance in your valves. Always characterized by hard starting when cold. As to where you might spend your dollars best, man that's a real hard one as there are countless ways to loose money in motorcycling and without knowing much about yourself? Well, you can see the issue.

I'm a huge fan of shorty levers and heated grips though. You don't live in Edmonton though so may see the heated grips so much but..... I digress
Michael
Yes Yes I know, I said, I'm building a project YZF1070

Basement is done now, 850 finished and gone...
Gotta get the new siding up on the house.
Fixing the FZ1 up, cleaning up garage and then I might even begin

Hooligan
Site Admin
Posts: 1857
Joined: Thu Dec 11, 2003 10:28 pm
Location: Cleveland, OH, USA

Post by Hooligan »

welcome to the board. bike looks very nice and well taken care of with 90k on the clock. hope you find some good info here.
Jason, aka: Hooligan
1994 YZF750-R
1996 YZF750-R
2003 Bonneville T100

cormier33
Regular Poster
Posts: 54
Joined: Sun Jun 12, 2011 12:20 am
Location: Vancouver, Canada

Post by cormier33 »

Thanks everyone. Good tip on the valves.
1997 YZF750RJ

cormier33
Regular Poster
Posts: 54
Joined: Sun Jun 12, 2011 12:20 am
Location: Vancouver, Canada

Post by cormier33 »

YEC_YZF750SP wrote:Great to see you here! :) Your YZF750 looks really clean, especially with 90K on it!

Yep, looking forward to seeing some trick mods on your sweet YZF.

For brakes, I'd highly recommend:

Goodridge or Galfer Stainless Steel Brakelines
Brembo 19X20 (forged or billet) radial pump front brake master cylinder
Brembo rotors
EBC HH compound brake pads
Motul RBF600 or RBF660 fluid

Cheers,

Julian
Hey Julian,

I just bought Galfer SS red brakelines. I am trying to find EBC HH brake pads for my bike but it doesn't seem like they sell them. Is there another model that fits our bikes?
1997 YZF750RJ

Big Jon
Help!!! I need a LIFE!!!
Posts: 847
Joined: Thu Dec 17, 2009 11:09 pm
Location: Edmonton Alberta Canada

Post by Big Jon »

The HH work fantastic on the track and in the hot n dry, but less so in wet conditions, I'd consider EBC Green for road and wet applications over the full sinter. Unless you're in the neigbouorhood in Vancouver that doesn't get rain! :)

YEC_YZF750SP
Help!!! I need a LIFE!!!
Posts: 520
Joined: Thu Mar 02, 2006 10:28 am
Location: British Columbia, Canada

Post by YEC_YZF750SP »

cormier33 wrote:
YEC_YZF750SP wrote:Great to see you here! :) Your YZF750 looks really clean, especially with 90K on it!

Yep, looking forward to seeing some trick mods on your sweet YZF.

For brakes, I'd highly recommend:

Goodridge or Galfer Stainless Steel Brakelines
Brembo 19X20 (forged or billet) radial pump front brake master cylinder
Brembo rotors
EBC HH compound brake pads
Motul RBF600 or RBF660 fluid

Cheers,

Julian
Hey Julian,

I just bought Galfer SS red brakelines. I am trying to find EBC HH brake pads for my bike but it doesn't seem like they sell them. Is there another model that fits our bikes?
Any dealer can order the EBC HH sintered pads in for you. They're available as well as EBC "Green" pads, which I've also used. Both compounds work really great for street use but on the track the "Green" compound wears out very fast and will lose they're initial bite when they've got lots of heat.

If you can, replace the stock rotors cause they're the biggest pile of crap! You'll notice a big difference with a set of high quality rotors. :)

cormier33
Regular Poster
Posts: 54
Joined: Sun Jun 12, 2011 12:20 am
Location: Vancouver, Canada

Post by cormier33 »

Big Jon wrote:The HH work fantastic on the track and in the hot n dry, but less so in wet conditions, I'd consider EBC Green for road and wet applications over the full sinter. Unless you're in the neigbouorhood in Vancouver that doesn't get rain! :)
There is a neighborhood in Vancouver that doesn't get rain?!!? Wish I knew where that was! hahaha.....you have a good point.
1997 YZF750RJ

cormier33
Regular Poster
Posts: 54
Joined: Sun Jun 12, 2011 12:20 am
Location: Vancouver, Canada

Post by cormier33 »

I've decided to go with the green compound just because I do more commuting on my bike than long weekend rides right now....plus, we do have a lot of rain here and I heard the HH are a little more tricky in the rain because of how powerful they are.

Thanks for the great tips guys. I am looking forward to installing my brand new galfer SS lines and brakes w/ the motul brake fluid!

I am now saving for the new rotors and brembo MC! It may take awhile depending on what the boss (wife) says......

Hey, while its on my mind, anyone know where to get a rear tire hugger? I've seen a couple in some pictures and think it looks great
1997 YZF750RJ

cormier33
Regular Poster
Posts: 54
Joined: Sun Jun 12, 2011 12:20 am
Location: Vancouver, Canada

Post by cormier33 »

Okay,

So, I just finished installing my SS Galfer brake and clutch lines. Then I cleaned the old calipers, etc installed the green compound brake pads and put new brake fluid (motul 600 RBF synthetic) in the system and bled it.

All I can say is wow! You guys were right......after doing some low speed stops, I did some high speed stops on the straight and in some nice twisty's.....unbelievable the difference this set up makes!

Thanks so much for the advice. I really appreciate it :)
1997 YZF750RJ

spook
Dolphin-headed purple plasma TLR thing?
Posts: 3837
Joined: Mon Jan 29, 2007 7:12 pm
Location: Melbourne. Australia

Post by spook »

You will find as you have in this case that there is a great bunch of people on this board with a huge amount of knowledge specific to these bikes.

I have as a result of the discussion regarding your brakes, re-thought my own approach to pad choice in regards to the type of riding I might be doing with the specific bike.

Up until now I have always gone with full sintered pads which are fantastic at the track, but probably not the best choice for real world road riding. Another reason to go with a softer pad is they won't eat you discs in the same way that the full sintered numbers do.

Perhaps a softer pad choice at the track with wets would be a better combination? Stan used to use heavier springs in his CV carbs to dampen throttle response.... a mechanical 'wet' map....food for thought hmmm. :)

Glad you are happy with the mods, keep us posted with your progress with the bike

User avatar
FZRDude
Co-Admin
Posts: 4807
Joined: Tue Jan 13, 2004 3:20 am
Location: North-Left Coast, USA
Contact:

Post by FZRDude »

spook wrote:You will find as you have in this case that there is a great bunch of people on this board with a huge amount of knowledge specific to these bikes........
Which is why we are glad everyone is here.
There are some who call me........Tim?
In Memory Of John "Silver" Douglas (Dec. 08, 2008) R.I.P. My Friend.

:wave: :popcorn :cursing :super-mad

cormier33
Regular Poster
Posts: 54
Joined: Sun Jun 12, 2011 12:20 am
Location: Vancouver, Canada

Post by cormier33 »

Thanks Spook, I certainly will keep you all updated.

I look forward to the time I can provide some advice/ideas to a forum member.

As for the brake pads, I think you are right. I am happy with my choice of non-sintered. If I had a track bike, I would love to try some sintered pads though, just to feel the response I have heard about :-)
1997 YZF750RJ

RocknFZR1000
Veteran Poster
Posts: 225
Joined: Mon Jun 18, 2007 3:35 pm
Location: Sharpsburgh GA
Contact:

Post by RocknFZR1000 »

nice bike...!
Thanks,
Frank
RocknFZR1000

My other toys:
http://www.youtube.com/watch?v=3r2kaUByDqM
http://cardomain.com/id/RocknZ28

If you think about it, It's Already To
Late!!! "FZR1000 in Your Face"

Image

Big Jon
Help!!! I need a LIFE!!!
Posts: 847
Joined: Thu Dec 17, 2009 11:09 pm
Location: Edmonton Alberta Canada

Post by Big Jon »

cormier33 wrote:If I had a track bike, I would love to try some sintered pads though, just to feel the response I have heard about :-)
If you end up in Edmonton check out our track, I have a bike you can flog out there. honest.

User avatar
FZRDude
Co-Admin
Posts: 4807
Joined: Tue Jan 13, 2004 3:20 am
Location: North-Left Coast, USA
Contact:

Post by FZRDude »

I'm just a couple of 3-ish hours south of you....(Seattle-ish)
There are some who call me........Tim?
In Memory Of John "Silver" Douglas (Dec. 08, 2008) R.I.P. My Friend.

:wave: :popcorn :cursing :super-mad

cormier33
Regular Poster
Posts: 54
Joined: Sun Jun 12, 2011 12:20 am
Location: Vancouver, Canada

Post by cormier33 »

Big Jon wrote:
cormier33 wrote:If I had a track bike, I would love to try some sintered pads though, just to feel the response I have heard about :-)
If you end up in Edmonton check out our track, I have a bike you can flog out there. honest.
Wow, thanks for the offer! I will contact you if ever I find my way out there.
1997 YZF750RJ

Post Reply