Akrapovic

Want the specs for a valve adjustment? Can you provide tips for bleeding brakes? Please use this section.
davemfox2
Veteran Poster
Posts: 391
Joined: Sun May 27, 2007 2:27 am
Location: Aberdeenshire, UK

Akrapovic

Postby davemfox2 » Sat Nov 03, 2018 5:50 am

Does anyone have the instruction booklet that Akrapovic used to give out with re-seleeve and re-pack kits? This booklet used to give specific drill bit sizes and also a few other relevant technical bits of information.

I used to have it, but it looks to have been recycled...

Dave
1993 YZF 750 SP with Yoshimura half system

User avatar
spook
Dolphin-headed purple plasma TLR thing?
Posts: 3402
Joined: Mon Jan 29, 2007 7:12 pm
Location: Melbourne. Australia

Re: Akrapovic

Postby spook » Tue Nov 06, 2018 4:29 am

no, sorry mate, not here.

If you have a repack kit, it should have rivets. measure the outside diameter of the new rivets, and use a new good quality (cobalt) drill bit to drill the head off down to were the remaining stem is. Get a tapered punch (needs to be a slightly smaller diameter than the stem) and tap out the remaining stem, then drill out the remaining rivet. It will then all come apart, and you can repack.


Return to “Tech Tips”

Who is online

Users browsing this forum: No registered users and 0 guests

cron