Kit and Maintenance manual for 07 R1?
-
- Dolphin-headed purple plasma TLR thing?
- Posts: 3839
- Joined: Mon Jan 29, 2007 7:12 pm
- Location: Melbourne. Australia
Kit and Maintenance manual for 07 R1?
Hi all, does anyone have a Kit and Maintenance manual for 07 R1?
-
- Dolphin-headed purple plasma TLR thing?
- Posts: 3839
- Joined: Mon Jan 29, 2007 7:12 pm
- Location: Melbourne. Australia
Re: Kit and Maintenance manual for 07 R1?
I've found the kit manual and downloaded it from here, it was a good download:
http://www.mediafire.com/download/atm7a ... Manual.pdf
http://www.mediafire.com/download/atm7a ... Manual.pdf
-
- Help!!! I need a LIFE!!!
- Posts: 3519
- Joined: Thu Jan 26, 2006 6:35 pm
- Location: Edmonton, Alberta
Re: Kit and Maintenance manual for 07 R1?
Think I've got one for an 04, or 02 kicking around somewhere.
You might get some way better responses to that one here http://www.r1-forum.com/ Ralph
You might get some way better responses to that one here http://www.r1-forum.com/ Ralph
Michael
Yes Yes I know, I said, I'm building a project YZF1070
Basement is done now, 850 finished and gone...
Gotta get the new siding up on the house.
Fixing the FZ1 up, cleaning up garage and then I might even begin
Yes Yes I know, I said, I'm building a project YZF1070
Basement is done now, 850 finished and gone...
Gotta get the new siding up on the house.
Fixing the FZ1 up, cleaning up garage and then I might even begin
-
- Dolphin-headed purple plasma TLR thing?
- Posts: 3839
- Joined: Mon Jan 29, 2007 7:12 pm
- Location: Melbourne. Australia
Re: Kit and Maintenance manual for 07 R1?
Thanks Michael, I've got the kit manual I need, I'll probably join one of the r1 forums, but thought I would ask my brothers here.
The 07 motor and swing arm will go into a 88 FZR special. I've decided this is the easiest way to get 200+ rear wheel HP I need for LSR.
It is going to be a very aerodynamic partial streamliner, putting out about 250 rwhp on nitros running 41 mm FCR's, I'm wanting the outright sit on motorcycle record here in Australia. I'll need 410 kph or 255 mph to beat what is currently on the table. The class is APS-1000. If all goes well I might bring it to Bonneville. Ideally I would like to be the first person to do 300 mph on a sit on motorcycle, on salt.
I might ask my mates at Kawasaki Australia to prepare me a special H2, and see if we can crack the production engine, production frame, (P-P) outright world record as well. The P-P 1650 record that Kawasaki Australia and my team achieved back in 2013 still stands as the worlds fastest in class on salt. Cheers.

The 07 motor and swing arm will go into a 88 FZR special. I've decided this is the easiest way to get 200+ rear wheel HP I need for LSR.
It is going to be a very aerodynamic partial streamliner, putting out about 250 rwhp on nitros running 41 mm FCR's, I'm wanting the outright sit on motorcycle record here in Australia. I'll need 410 kph or 255 mph to beat what is currently on the table. The class is APS-1000. If all goes well I might bring it to Bonneville. Ideally I would like to be the first person to do 300 mph on a sit on motorcycle, on salt.
I might ask my mates at Kawasaki Australia to prepare me a special H2, and see if we can crack the production engine, production frame, (P-P) outright world record as well. The P-P 1650 record that Kawasaki Australia and my team achieved back in 2013 still stands as the worlds fastest in class on salt. Cheers.