Want the specs for a valve adjustment? Can you provide tips for bleeding brakes? Please use this section.
Post Reply
Veteran Poster
Posts: 453
Joined: Sun May 27, 2007 2:27 am
Location: Aberdeenshire, UK


Post by davemfox2 »

Does anyone have the instruction booklet that Akrapovic used to give out with re-seleeve and re-pack kits? This booklet used to give specific drill bit sizes and also a few other relevant technical bits of information.

I used to have it, but it looks to have been recycled...

1993 YZF 750 SP with Yoshimura half system

Dolphin-headed purple plasma TLR thing?
Posts: 3595
Joined: Mon Jan 29, 2007 7:12 pm
Location: Melbourne. Australia

Re: Akrapovic

Post by spook »

no, sorry mate, not here.

If you have a repack kit, it should have rivets. measure the outside diameter of the new rivets, and use a new good quality (cobalt) drill bit to drill the head off down to were the remaining stem is. Get a tapered punch (needs to be a slightly smaller diameter than the stem) and tap out the remaining stem, then drill out the remaining rivet. It will then all come apart, and you can repack.

Post Reply