Page 1 of 1


Posted: Sat Nov 03, 2018 5:50 am
by davemfox2
Does anyone have the instruction booklet that Akrapovic used to give out with re-seleeve and re-pack kits? This booklet used to give specific drill bit sizes and also a few other relevant technical bits of information.

I used to have it, but it looks to have been recycled...


Re: Akrapovic

Posted: Tue Nov 06, 2018 4:29 am
by spook
no, sorry mate, not here.

If you have a repack kit, it should have rivets. measure the outside diameter of the new rivets, and use a new good quality (cobalt) drill bit to drill the head off down to were the remaining stem is. Get a tapered punch (needs to be a slightly smaller diameter than the stem) and tap out the remaining stem, then drill out the remaining rivet. It will then all come apart, and you can repack.