Page 1 of 1
just stuk my analizer in the race can
Posted: Sat Jul 03, 2004 12:30 pm
by exupjon
anybody know what 02 and co2 readings i should get analizer sez 02 19.5 to 20.8 co2 parts per million 1494 to 1500 .ime just messin at the moment but all help is good . JON<!--EZCODE EMOTICON START :hat --><img src=
http://www.ezboard.com/images/emoticons/pimp.gif ALT=":hat"><!--EZCODE EMOTICON END--> <!--EZCODE EMOTICON START :hat --><img src=
http://www.ezboard.com/images/emoticons/pimp.gif ALT=":hat"><!--EZCODE EMOTICON END--> <p></p><i></i>
UPS
Posted: Sat Jul 03, 2004 12:39 pm
by exupjon
WHAT A PLONKER ITS 1495 TO 1500PPM CO NOT CO2 <p></p><i></i>
Re: UPS
Posted: Sun Jul 04, 2004 1:00 am
by cvhjkdis
Whats running condition? warm/idle?<br>Those aren't good #'s even for a truck, really.<br> High O2 out the exhaust means the oxygen going in isn't being burned, and 1400 CO is really rich mixture. I'm not sure what to shoot for on a bike, but a non catalyst car should run about 1% CO and less than 100 ppm HC out the pipe if well tuned. O2 should be low, CO2 should be high. Are you working with a 4 gas analyzer? I'll wish you luck on it. <p></p><i></i>
