Tinkering with the YZF
Posted: Sun Mar 21, 2010 5:49 am
As I am following advice and not doing anything to the FZR1000 (yet) I have been tinkering with the 750.
Rotors and cailipers
Full Akropovic system
Home made dash. Cut off the speedo and lights, turn it upside down, print some white faces, paint the needles, cut up some scrap aluminium and voila..(a bit blurry)
Also fitted Factorypro jet kit and had it dyno tuned. Went from 85hp at 10,000rpm to 107hp with a peak of 115hp! Torque curve was about 30% more from 6,000 rpm up
Should make it a different bike!
Rotors and cailipers
Full Akropovic system
Home made dash. Cut off the speedo and lights, turn it upside down, print some white faces, paint the needles, cut up some scrap aluminium and voila..(a bit blurry)
Also fitted Factorypro jet kit and had it dyno tuned. Went from 85hp at 10,000rpm to 107hp with a peak of 115hp! Torque curve was about 30% more from 6,000 rpm up
Should make it a different bike!
