I used to have it, but it looks to have been recycled...
- Dolphin-headed purple plasma TLR thing?
- Posts: 3591
- Joined: Mon Jan 29, 2007 7:12 pm
- Location: Melbourne. Australia
If you have a repack kit, it should have rivets. measure the outside diameter of the new rivets, and use a new good quality (cobalt) drill bit to drill the head off down to were the remaining stem is. Get a tapered punch (needs to be a slightly smaller diameter than the stem) and tap out the remaining stem, then drill out the remaining rivet. It will then all come apart, and you can repack.