Wire Harness ?

thewyatt · Post by **thewyatt** » Wed Jan 26, 2005 1:44 pm

Hear is my question. What year's wire harness can fit a 1990 FZR600. I know 89-90 do. There is a 96 on line for cheap but dunno if it will fit, do any of you?

orionburn · Post by **orionburn** » Wed Jan 26, 2005 1:55 pm

Have you tried looking at the Yamaha parts fiche to see if the numbers match up? Could try calling your local dealer as well. They should be able to tell you. Nate - 87 FZR1000 Have you seen my fairing?

thewyatt · Post by **thewyatt** » Wed Jan 26, 2005 6:57 pm

Yeah I called the dealer. THe part numbers are the same for 89-90. But sometimes I am aware with cars that they will jus change the part numbers. As far as Fiche goes. I would need the fiche for 1996 fzr600 and compare to 1990. I only know of one site I have found iwth fiche. THat is the FZRarchives. Those are bit hard on my eyes. (yeah yeah...age is getting to me) Thx for the help though, and if you have more I wont say no to it.<img src=http://img.photobucket.com/albums/v209/ ... iker_3.gif ALT=":riding"> <img src=http://img.photobucket.com/albums/v209/ ... iker_3.gif ALT=":riding">

thewyatt · Post by **thewyatt** » Wed Jan 26, 2005 7:01 pm

Didnt see an edit button on this forum....hhmmm I looked at the archvies site...only give one model and it doesnt say which one. Either way I need the 1996 and 1990 fiche. Any help here?

Post by **FZRDude** » Wed Jan 26, 2005 7:21 pm

The EDIT button is under your name. <img src="http://img.photobucket.com/albums/v209/ ...  There are some who call me........Tim? Director of Entertainment <a href="http://eddieandthecruisersmc.com" target="top">Eddie & the Cruisers</a> 1994 FZR 1000

canappa · Post by **canappa** » Thu Jan 27, 2005 1:05 pm

go to yamaha usa site, and check online part catalog, look at the part# for your bike and see if other year 600 have the same part # canap

orionburn · Post by **orionburn** » Fri Jan 28, 2005 5:41 am

Wyatt.... I had looked at the fiche. Original was 3HH-82590-00-00 and the one of the newer was 3HH-82590-11-00. I don't know what the difference is. Maybe ChuckD can tell from the part numbers. I've seen that on a lot of parts. Most of it's the same but one will have that -11 added to it. Nate - 87 FZR1000 Have you seen my fairing?

dragracer1951 · Post by **dragracer1951** » Fri Jan 28, 2005 6:34 am

<blockquote>Quote:<hr>Most of it's the same but one will have that -11 added to it. <hr></blockquote> What's the difference between a stalagtite and a stalagmite? A stalagmite's got an "M" in it!!! <img src=http://img.photobucket.com/albums/v209/ ... ananna.gif ALT=":banana"> <img src=http://img.photobucket.com/albums/v209/ ... ananna.gif ALT=":banana"> Jim We goin to the Gee Pee We goin to the Gee Pee... <img src=http://img.photobucket.com/albums/v209/ ... ananna.gif ALT=":banana"> <img src=http://img.photobucket.com/albums/v209/ ... ananna.gif ALT=":banana"> <img src=http://img.photobucket.com/albums/v209/ ... ananna.gif ALT=":banana"> <img src=http://img.photobucket.com/albums/v209/ ... ananna.gif ALT=":banana">

canappa · Post by **canappa** » Fri Jan 28, 2005 3:27 pm

LOL that 11 is a different part for sure you can see this kind of difference in similar but not equal yamaha parts.......

Post by **jjs777** » Sun Jan 30, 2005 5:24 pm

I know at least the wireharness connectors for the CDI box is different between that of a 90 and 95. Plus the EXUP servo is located in a different spot between that of a 90 and 95. 90 the servo is under driver side rear tail panel....95 is under tank. This means length of wireharness for that at least might be a tad interesting. -John 95 FZR1000 90 FZR1000Edited by: <A HREF=http://p072.ezboard.com/bexupbrotherhoo ... >jjs777</A> <IMG HEIGHT=10 WIDTH=10 SRC="http://home.comcast.net/~john.stempien/ ... larger.gif" BORDER=0> at: 1/30/05 3:25 pm

EXUP Worldwide

Wire Harness ?

Wire Harness ?

Re: Wire Harness ?

update

update2

Re: update2

Re: update2

Re: update2

Re: update2

Re: update2

Re: update2