Cylinder carbon deposits...

Want the specs for a valve adjustment? Can you provide tips for bleeding brakes? Please use this section.
Post Reply
Nbot
Help!!! I need a LIFE!!!
Posts: 500
Joined: Wed Dec 10, 2003 2:00 am

Cylinder carbon deposits...

Post by Nbot »

Hey ya'll...just thought I'd show ya the plugs from my girlfriends 1992 Seca 600 after I used Yamaha <!--EZCODE ITALIC START--><em>Ring Free Fuel Additive</em><!--EZCODE ITALIC END-->. The stuff is supposed to "clean away carbon and varnish from ring lands, piston, combustion chamber, intake and exhaust manifolds, ports, valves, carburetors and jets in 2 & 4 cycles." Usually I think fuel additives are a joke, but I'm thinking this one did its job as it says for the "Shock treatment": Engines with significant carbon build-up may experience plug fouling as carbon is removed. Which is fine b/c I was planning a tune-up anyhow (engine oil also has to be changed afterward b/c drains down into pan if doing shock treatment, but not for "constant treat"), but the carbon removal is obvious here--you can definitely see debris sticking to the plugs (plus I was hoping to cheat on a full carb clean)<br><br><!--EZCODE IMAGE START--><img src="http://img.photobucket.com/albums/v237/ ... <!--EZCODE IMAGE END--> <p></p><i>Edited by: <A HREF=http://p072.ezboard.com/bexupbrotherhoo ... ot>Nbot</A> at: 7/28/04 10:48 am<br></i>

Ton up
Veteran Poster
Posts: 212
Joined: Thu Dec 04, 2003 4:45 pm
Location: Christchurch, New Zealand

Re: Cylinder carbon deposits...

Post by Ton up »

So will the debri's cause any problems with scoring of the cylinders etc? <p></p><i></i>

Nbot
Help!!! I need a LIFE!!!
Posts: 500
Joined: Wed Dec 10, 2003 2:00 am

Re: Cylinder carbon deposits...

Post by Nbot »

I don't know exactly, I was worried about the visible buildup on the threads where the plugs go....but I guess the theory is that the additive loosens up the stuff enough to get burned and shouldn't have to change the plugs again....so I'm not really sure Tonup, you'd think it wouldn't though>>>>> <p></p><i></i>

User avatar
djalbin
Smilies Run Amok
Posts: 1473
Joined: Wed Sep 24, 2003 10:36 pm
Location: Tucson, AZ

Regular Cleaning

Post by djalbin »

For regular cleaning of the cylinders, rather than shock treatment, I use a Lucas Oil product called Top Cylinder Lubricant and Injector Cleaner. Comes in a 5.5 oz bottle to treat 25 U.S. gallons. So I use 1 oz in a full tank of gas (5 gal). It lubricates and cleans injectors, carburetors, top cylinders, valve seats, etc ... I can really tell the difference in the performance of the engine when I have this stuff in the tank. <br>Don <p></p><i></i>

yzf1guy
Posts: 7
Joined: Tue Aug 24, 2004 11:38 pm

Re: Regular Cleaning

Post by yzf1guy »

Good info Don, where can I purchase some of this Lucas product? <p></p><i></i>

jjs777
Co-Admin
Posts: 1665
Joined: Sat May 24, 2003 2:05 am
Location: North Shore, Massachusetts USA
Contact:

Re: Regular Cleaning

Post by jjs777 »

<!--EZCODE AUTOLINK START--><a href="http://shop.store.yahoo.com/rodi/luc100 ... <!--EZCODE AUTOLINK END--><br><br>and since its a Yahoo! store it would give me confidence as to the distributors authenticity. <p>-John<br>95 FZR1000<br>90 FZR1000</p><i></i>

User avatar
djalbin
Smilies Run Amok
Posts: 1473
Joined: Wed Sep 24, 2003 10:36 pm
Location: Tucson, AZ

Re: Regular Cleaning

Post by djalbin »

I buy mine at the local auto parts stores. In this area the most common stores are Pep Boys, Auto Zone, and Checker Auto.<br>Don <p></p><i></i>

Post Reply