well i bought a "new" set of carbs of a 95, that was cleaned and set up right as everything was suppose to be, and ofcourse hope it would stop my problems on the bike running.
only thing i havent done is trying to sync em as im waiting for my new sync tool to arrive some times next week( i hope). been searching and reading up on the troubble im getting with it, so here it goes, it starts up fine everything seems and sound normal when cold on idle as it starts warming up and giving it some revs it hangs a sec or to before running down to idle and the idle is rough, when warm. i tried last night to take it for a spinn down the road it does not give me any power to speak about like it's running on 3 out of the 4 cylinder's that it got. and when it's hot it starts to missfire and u get some rattle in the engine.
it was alot worse on my other oem carbs that i took of cos i think i messed em up bad, im clue less atm, tried to make a video of the bike running
but there is no sound on it, gona do another one.
what ive done is this, ive put brand new ngk spark pluggs in, cut down the spark plug wires to get a good conection. some where loose on the wires\leds, valves was done before this and i hope it was done right since i have no troubble starting the bike, and since it runs ok when cold im wondering what could be wrong, cdi? coils? carbs? me? ive almost given up on the bike and been actually thinking of start selling it of in bits if i cant get it to run againe, next year i willl take it to a shop if cant figure it out as the seson for driving is soon to be over
and it's kinda hard to write up on how it's running to expalin it. but since ive change the carbs it cant be the carbs thats the troubble, or it can be i have no clue really.im pissed of at it.
