well, the part with the head fuse on it did!
now I have to buma ride home from work cuz its dark and no headlights
guess im tracking down wires to find a culprit
any suggestions on places to look???
fuse box melted!
-
- Help!!! I need a LIFE!!!
- Posts: 725
- Joined: Tue Sep 05, 2006 9:03 pm
- Location: Urbana, IL
- Contact:
fuse box melted!
88 FZR 1000 - SuperTrap, K&N, FP kit - sold
90 FZR 1000 - 1040, Ohlins, 91 USD's...some other stuff - sold
93 FZR 600 - rat/cafe/POS/Trackbike Project
03 SV1000S - bye bye
06 R6 50th Anniversary - slip on, PCIII, race rails
90 FZR 1000 - 1040, Ohlins, 91 USD's...some other stuff - sold
93 FZR 600 - rat/cafe/POS/Trackbike Project
03 SV1000S - bye bye
06 R6 50th Anniversary - slip on, PCIII, race rails
When I was working at a Yamaha dealer here in Dallas a long time ago I saw a lot of melted fuse boxes. We found that it was most often caused by corrosion in the fuse holder itself. Sometimes the connectors that the fuse plugs into would also become loose and cause the fuse tabs to overheat. Very seldom did I see this caused by a wiring problem. Wiring problems will almost always blow the fuse instead of overheating the connector. I see this quite often in cars also.
Bob
'97 YZF750R (sold)
'87 Porsche 944 Turbo
'04 GTO
If you haven't seen god your not going fast enough
'97 YZF750R (sold)
'87 Porsche 944 Turbo
'04 GTO
If you haven't seen god your not going fast enough
-
- Help!!! I need a LIFE!!!
- Posts: 725
- Joined: Tue Sep 05, 2006 9:03 pm
- Location: Urbana, IL
- Contact:
guess ill buy a new box, I have a single one, but might as well redo the whole unit
88 FZR 1000 - SuperTrap, K&N, FP kit - sold
90 FZR 1000 - 1040, Ohlins, 91 USD's...some other stuff - sold
93 FZR 600 - rat/cafe/POS/Trackbike Project
03 SV1000S - bye bye
06 R6 50th Anniversary - slip on, PCIII, race rails
90 FZR 1000 - 1040, Ohlins, 91 USD's...some other stuff - sold
93 FZR 600 - rat/cafe/POS/Trackbike Project
03 SV1000S - bye bye
06 R6 50th Anniversary - slip on, PCIII, race rails
-
- Help!!! I need a LIFE!!!
- Posts: 2535
- Joined: Fri Jan 02, 2004 1:10 pm
- Location: Bremerton, Wa
Check the condition of the three phase connector from the alternator very carefully. I have personal experience with this. It's not a pretty sight to see your alternator windings glowing red.....
Jim
Hey Kid...
Is my tail light still working?
"...you can't tune a motor that's hurt. They run much faster on fuel then they do on aluminum." - Elmer Trett
Hey Kid...
Is my tail light still working?
"...you can't tune a motor that's hurt. They run much faster on fuel then they do on aluminum." - Elmer Trett
-
- Help!!! I need a LIFE!!!
- Posts: 725
- Joined: Tue Sep 05, 2006 9:03 pm
- Location: Urbana, IL
- Contact:
okie dokiedragracer1951 wrote:Check the condition of the three phase connector from the alternator very carefully. I have personal experience with this. It's not a pretty sight to see your alternator windings glowing red.....
sounds like be spending some quality time in the garage tonight
88 FZR 1000 - SuperTrap, K&N, FP kit - sold
90 FZR 1000 - 1040, Ohlins, 91 USD's...some other stuff - sold
93 FZR 600 - rat/cafe/POS/Trackbike Project
03 SV1000S - bye bye
06 R6 50th Anniversary - slip on, PCIII, race rails
90 FZR 1000 - 1040, Ohlins, 91 USD's...some other stuff - sold
93 FZR 600 - rat/cafe/POS/Trackbike Project
03 SV1000S - bye bye
06 R6 50th Anniversary - slip on, PCIII, race rails